120/1-H

Atributi proizvoda

  • materijal: Premium krom-vanadij
  • kovan, u cijelosti ojačan i zakaljen
  • kromirani (ISO 1456:2009)
  • polirane glave
  • obuhvatni dio sa LIFE profilom
  • izrađeni prema standardu ISO 7738 (samo metričke dimenzije)
  • 480/6

Prednosti:

  • zakovica metalne kopče koja se ne može demontirati
  • na svakom je alatu označena težina alata
  • dvije kopče mogu se učvrstiti u kopču, što osigurava sigurnu promjenu alata
  • Unior je prilagođen za rad na visini i održava osnovne funkcije alata
  • metalna klizna kopča ne ometa vijak s jednom ili drugom stranom ključa

Srtandardi

ISO 7738

#title#
šifraWrench sizeLenghtWidthWidthThicknessThicknesssr: težina-- prazen stolpec -- 
626076611910,414,553,518
626077712911,516,55,83,922
626078814113,218,56,93,928
626079915214,3217,3436
6260801016315,9237,54,243
6260811117617,824,584,554
6260821218619,426,58,54,764
6260831319920,429,58,55,272
626084142102231,595,286
6260851522223,533,59,55,7101
6260861623424,83610,56,2136
6260871724516,13810,56,7155
6260881825727,740117,2173
6260891926829,342127,2198
62609020280314412,57,7224
6260912129132,645,5138,2255
6260922230334,146,5138,2273
6260932331435,750,5138,2316
6260942433037,352,5148,5361
626095253373954,514,58,5384
6260962634940,156158,5424
6260972736041,657,5159481
6260982837343,259,515,19542
6260992938344,961,5169,5573
6261003039546,563,51610627
62610132416496816,510,5744
6261763550053,578,82013,61540
6261173650053,578,82013,61485
626174385155882,820,514,11458
626118415406286,82114,62113
6262951/4"11910,414,553,518
6262965/16"14213,218,56,93,928
6262973/8"15314,3217,3433
6262987/16"17617,824,584,553
6262991/2"19920,429,58,55,274
6263009/16"2112231,595,283
6263015/8"23424,83610,56,2135
62630211/16"24526,13810,56,7153
6263033/4"26829,342127,2200
62630413/16"29132,645,5138,2258
6263057/8"30334,146,5138,2274
62630615/16"33037,352,5148,5358
6263071"3373954,414,58,5389
6263081.1/16"36041,657,5159477
6263091.1/8"37243,259,515,59535
6263101.1/4"417496816,510,5748
6263111.5/16"417496816,510,5740
6263121.3/8"50053,578,82013,61529
6263131.7/16"50053,578,82013,61489
6263141.1/2"50053,578,82013,61473
6263151.5/8"5406286,82114,62132
6263161.11/16"5406286,82114,62096
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (slike)

User must be trained to perform work at heights pursuant to the national legislation.

User must use the prescribed personal protective equipment.

Working range at heights is the radius of two metres from the point of attachment on the user. No other person or equipment is permitted within that range due to the possibility of damage caused by a falling tool.

Please check the tools regularly and always before each use.

After any fall of a tool, check the rope and the tool. If necessary, replace the tool and/or rope.

The maximum weight of each tool defined by Unior as safe tool for work at heights attached to a work belt amounts to 2.3kg.

The total weight of tools that can be attached to a user's work belt should not exceed 10% of the user's weight.

Attachment ropes should not be shortened, reworked etc. If a rope is damaged or destroyed, do not use the tools.

During work, do not unfasten or detach tools from yourself.

When changing (switching) tools, it is recommended to observe the procedure of replacement described in the Unior d.d. catalogue (tools are attached throughout the replacement with one carabiner or the replacement is made at a so-called safe place).

Do not drop or throw tools deliberately, since this may result in a spring effect and unforeseen consequences.

Tools on a rope should not be wound, since that may lead to unforeseen consequences.

User selects Unior attachment elements depending on the purpose of use and with respect to the weight of tools (tool weight is indicated on a tool).

Tracking manufacture code and final control code are indicated on each tool.

The carabiner on the lanyard is attached to the ring on the tool. The rings on the tools are large enough to accept 2 carabiners.

The carabiner on the lanyard has to be protected against opening using a lock ring.

Before removing the tool from the belt, unscrew the lock ring on the carabiner on the belt.

Open the carabiner on the belt and remove the tool, which is attached to a lanyard, from the carabiner on the belt. The tool is now ready for use.

Correct attachment of the tool to the lanyard. Return the tool to the belt following the steps in reverse order.

Using the socket remover (Article 1111) depress the pin in the hole while removing the socket from the square drive of the ratchet and then switch the socket or extension.

  • VELIKO EFIKASNA REŠENJA

    Rad na visini podrazumeva visok nivo rizika, tako da se ništa ne može prepustiti slučaju. Unior - sinonim za visokokvalitetne ručne alate, predstavlja liniju alata posebno prilagođenih za rad na visini kako bi se izbjegli opasni padovi.
  • KVALITETNI ALATI ZA SIGURAN RAD NA VISINAMA

    Alat za visinu rada standardni je alat s nadogradnjom - mogućnost priveza. Povezani alat značajno poboljšava sigurnost posla.
  • Visoka preciznost

    Uniorovi alati za rad na visini su dizajnirani da sačuvaju osnovne funkcije alata, ergonomiju i korisnost, ili da ih smanje u najmanjoj mogućoj meri.