Kolica za alat Hercules
Tehnički podaci
Više o proizvodu
Profili
Atributi proizvoda
- materijal: Premium Plus lim
- sa sistemom zaključavanja
- lock with key included also foam keyring
- kotači otporni na ulja i kiseline prečnika 100mm, jedan sa kočnicom, koja blokira rotaciju točka
- police s kugličnim vodilicama
- sistem otvaranja i zatvaranja ladica vrlo je jednostavan zbog inovativnog rješenja, nudi korisniku istovremeno prihvat i otvaranje ladica
- sintetičke podloge štite ladice i alat od oštećenja
- obložena eko bojom Qualicoat standard kvalitetom
- 7 prednjih ladica dimenzija 560x365mm (5 visine 70mm i 2 visine 150mm)
- osnovne dimenzije sa ručkom i točkama L 1182 x W 640 x H 955 mm
- ukupna zapremina ladice: 133 litara
- vrata s bravicom
- drvena radna površina
- statička nosivost kolica bez kotača: 2300kg
- dinamički nosivost: 550 kg
- nosivost prednjih ladica: 45 kg
- ladice kompatibilne sa SOS alatima 1/3, 2/3, 3/3
Prednosti:
- Sporednii dio kolica je izrađen od perforiranog lima, koji nudi mogućnost vješanja alata uz pomoć kuka
- Osim toga, tu je i držač spreja za skladištenje sprejeva do promjera 68 mm i sporedna vrata s bravom
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.
Accessories
Safety tips
- Lock all your drawers before trying to roll the tool carriage into a new work area.
- Set the brakes on the locking casters after you have rolled the cabinet to your work area.
- Treat you tool carriage, tool chests, or tool boxes with respect.
- Always follow the prescribed max load capacity of individual drawers and the carriage as a whole.
- Always put heavier objects in the bottom drawers
- Always close drawers when not in use.
- Always follow manufacturer manual instructions regarding assembly and repair of your tools.
- Don't open two or more drawers at the same time, there is high chance of it tipping over.
- Don't throw tools into drawer, always put the tools in.
- Don't use an opened drawer as a working surface.
- Don't clean a lacquered surface with a solvent cleaner.
- Don't pull a tool carriage as you won't be able to see where you are headed. Push it in front of you so you can see where you are going.
- Don't stack a tool carriage with too many extra chests or tool trays; it may tip over at the most unexpected time.
- Don't roll a tool carriage with loose tools or parts on top of the carriage.
- Don't roll a tool carriage too quickly; a pot hole in the floor or some hardware on the floor may cause an accident.
- Don't overload the drawers; if you haven't got room for all of your tools, you need a larger tool carriage.
- Don't open up too many loaded drawers at a time; close each drawer before opening up another. Heavily loaded opened drawers are an invitation to tipping.
Kvalitetan čelični lim
Kolica za alat, sanduci, ormari i razne kutije za odlaganje alata, kao i radni stolovi, panoi, kuke i ostali pribor izrađeni su od kvalitetnog čeličnog lima. Lakirane površine otporne su na koroziju i ogrebotine. Ova oprema je praktički neuništiva.Inovativan dizajn
Sveobuhvatno poznavanje radnih zahtjeva različitih poslova lokalnih profesionalaca rezultiralo je izradom radne opreme koja nudi veliku dostupnost, pregledno odlaganje alata i bolju vidljivost u svakom trenutku.Preglednost odlaganja alata
Svojom preglednošću i lakom dostupnošću, Unior radna oprema omogućava vam da svoju radionu održavate urednom te da na taj način povećavate vlastitu produktivnost.