Profili

Artikli izrađeni u skladu sa VDE standardimaScrewdriver profile, flatPremium hard chrome vanadium steelLifetime warranty

Srtandardi

DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

Atributi proizvoda

  • vrh od krom-vanadij-molibdena, u cjelosti ojačan i zakaljen
  • vrh bruniran
  • ručka ergonomski oblikovana
  • trokomponentni materijal
  • otvor u dršci za viješanje
  • izrađeno prema standardu DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018
  • izrađeno prema standardu ISO8764-1,2
#title#
šifraThickness x widthAdditionsl lenghtLenghtTežina
6164360.4 x 2.57516033
6164370.5 x 3.010018537
6164380.6 x 3.510018539
6164390.8 x 4.010018543
6212471.0 x 4.512522575
6164401.0 x 5.512522575
6164411.2 x 6.5150260113
6164421.2 x 8.0175295163
6212481.6 x 10.0200320115
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (slike)

Velika kontaktna površina obezbeđuje postizanje većeg obrtnog momenta.

Ergonomski dizajnirana ručka štiti vašu ruku

Velika kontaktna površina = veći obrtni moment

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
  • VDE tools that have several parts, have to be assembled correctly before use.
  • When working with VDE tools avoid contact with water.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Don't use tools that shows sign of wear and have the second layer of plastic visible.

Questions & Answers

  • Are insulated (VDE) tools considered as personal protective equipment (PPE)?
    According to EU regulations, VDE tools are not considered as PPE.
  • Are the VDE tools only being sampled in series production?
    The high voltage test (at 10kV) is performed fully on each tool. Other tests are performed in accordance with the EN60900 standard.
  • Vrhunska zaštita

    Uniorov izolirani VDE alat osigurava potpunu zaštitu čak i kada se koristi pri naponu do 1000 V. Sigurnost svakog individualnog Uniorovog VDE alata temeljito se ispituje putem testova: test otpornosti na plamen, testovi izolacije i provodljivosti, test otpornosti na udar i test otpornosti žiga.
  • Čelik vrhunske kvalitete

    Izolirani ključevi, kliješta, škare, odvijači i ostali alati za rad pod naponom izrađeni su od visokokvalitetnog alatnog čelika, sa dodatnom zaštitom, a dizajnirani su za jednostavno i sigurno korištenje.
  • VDE propisi

    VDE alati su izolirani i ispitani u skladu s VDE propisima. Unior alat za rad pod naponom zadovoljava sve zahtjeve međunarodno priznatog europskog standarda EN 60900.