603CS6TVDETBI

Atributi proizvoda

Set includes:

  • 3x VDETBI electrician´s screwdriver with insulated blade (article 603VDETBI) dim. 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150
  • 2x VDETBI crosstip (PH) screwdriver with insulated blade (article 613VDETBI) dim. PH 1x80, PH 2x100
  • 1x voltage tester 220 - 250 V (article 630VDE) dim. 0.5x3.0x140
#title#
Naziv proizvoda SKU Članak Dimenzije - YouTube video kanal "
Izvijači VDE TBI i ispitivač napona u garnituri 617043 603CS6TVDETBI - 6
Izvijač plosnati električarski VDE TBI 603VDETBI 0.8 x 4.0x100, 1.0 x 5.5x125, 1.2 x 6.5x150 3
Izvijač križni (PH) VDE, TBI 613VDETBI PH1x80, PH2x100 2
Ispitivač napona 220 - 250 V 630VDE 0.5 x 3.0x140 1
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (Slike)

Ergonomski oblikovana drška za odličan prihvat i zaštitu ruke korisnika

Ergonomski dizajnirana ručka štiti vašu ruku

Velika kontaktna površina = veći okretni moment

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
  • VDE tools that have several parts, have to be assembled correctly before use.
  • When working with VDE tools avoid contact with water.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Don't use tools that shows sign of wear and have the second layer of plastic visible.
  • Vrhunska zaštita

    Uniorov izolirani VDE alat osigurava potpunu zaštitu čak i kada se koristi pri naponu do 1000 V. Sigurnost svakog individualnog Uniorovog VDE alata temeljito se ispituje putem testova: test otpornosti na plamen, testovi izolacije i provodljivosti, test otpornosti na udar i test otpornosti žiga.
  • Čelik vrhunske kvalitete

    Izolirani ključevi, kliješta, škare, izvijači i ostali alati za rad pod naponom izrađeni su od visokokvalitetnog alatnog čelika, sa dodatnom zaštitom, a dizajnirani su za jednostavno i sigurno korištenje.
  • VDE propisi

    VDE alati su izolirani i ispitani u skladu s VDE propisima. Unior alat za rad pod naponom zadovoljava sve zahtjeve međunarodno priznatog europskog standarda EN 60900.