Više o proizvodu

Profili

Artikl izrađen prema VDE standarduScrewdriver profile, flatLifetime warranty

Standard

DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

Atributi proizvoda

  • dimenzija 140 sa spojnicom
  • izrađeno prema standardu DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018
#title#
šifraThickness x widthDodatna dužinaDužinaTežina
6176590.5 x 3.06014016
6176600.6 x 3.59018027
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (Slike)

Ergonomski oblikovana drška za odličan prihvat i zaštitu ruke korisnika

Velika kontaktna površina obezbeđuje postizanje većeg obrtnog momenta.

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Vrhunska zaštita

    Uniorov izolirani VDE alat osigurava potpunu zaštitu čak i kada se koristi pri naponu do 1000 V. Sigurnost svakog individualnog Uniorovog VDE alata temeljito se ispituje putem testova: test otpornosti na plamen, testovi izolacije i provodljivosti, test otpornosti na udar i test otpornosti žiga.
  • Čelik vrhunske kvalitete

    Izolirani ključevi, kliješta, škare, izvijači i ostali alati za rad pod naponom izrađeni su od visokokvalitetnog alatnog čelika, sa dodatnom zaštitom, a dizajnirani su za jednostavno i sigurno korištenje.
  • VDE propisi

    VDE alati su izolirani i ispitani u skladu s VDE propisima. Unior alat za rad pod naponom zadovoljava sve zahtjeve međunarodno priznatog europskog standarda EN 60900.