Tournevis Boule CR pour vis à fente

#tif#
627CR

Feuille de données

pdfTournevis Boule CR pour vis à fente - 627CR

Profils

profil pour tournevis à fentePremium hard chrome vanadium steelLifetime warrantyTrivalent chrome plated

Normes

DIN 5265, DIN ISO 2380-1:2006 et DIN ISO 2380-2:2006

ATTRIBUTS DU PRODUIT

  • Lame : acier Chrome Vanadium Premium Hard
  • Lame chromée, extrémité brunie
  • Poignée ergonomique TBI
  • Poignée polypropylène
  • Trou pour suspension sur crochet
  • Fabriqué dans le respect des normes DIN ISO 2380-1:2006 et DIN ISO 2380-2:2006
#title#
codea x bLongueur supplémentaireLongueurDiamètrePoids
6163990.8 x 4.02586437
6164001.0 x 5.525865.541
6164011.2 x 6.525866.543
* Les images des produits ne sont pas contractuelles. Toutes les dimensions sont en mm, les poids en grammes.

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.

Safety (Photo)

Don't use a screwdriver for stirring paint.

Don't use a screwdriver for stirring paint.

Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself.

Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself.

Don't use a screwdriver near live wires or for electrical testing.

Don't use a screwdriver near live wires or for electrical testing.

Don't use a screwdriver for prying, punching, chiselling, scoring or scraping.

Don't use a screwdriver for prying, punching, chiselling, scoring or scraping.

  • manche au design ergonomique

    A la qualité supérieure des matériaux utilisés pour la gamme de tournevis Unior viennent s’ajouter des poignées de conception ergonomique qui permettent une excellente qualité de prise.

  • manche tri-matière

    Grâce à l’association de surfaces rigides et souples, la poignée spéciale à trois composantes (brevetée Unior) permet une utilisation efficace et confortable qui sollicite très peu le poignet pendant le travail.

  • Prise antidérapante

    Conçus pour s’adapter à une large variété de profils de vis et possédant une poignée à trois composantes, les tournevis UNIOR assurent une grande efficacité et une prise antidérapante.