Topaç düz tornavida CR

#tif#
627CR

Veri formu

pdfTopaç düz tornavida CR - 627CR

Profiller

Screwdriver profile, flatPremium hard chrome vanadium steelLifetime warranty

Standards

DIN 5265, ISO 8764-1,2

Product features

  • bıçak: krom vanadyum molibden çeliği, tamamen sertleştirilmiş ve temperlenmiş
  • krom kaplamalı, kararlaştırılmış uç
  • sap: ergonomik şekilli
  • kol - polipropilen
  • asma deliği
  • ISO 2380-1,2 standardına göre yapılmıştır
#title#
kodThickness x widthAdditionsl lenghtLenghtDiameterağırlık
6163990.8 x 4.02586437
6164001.0 x 5.525865.541
6164011.2 x 6.525866.543
* Ürünlerin resimleri semboliktir. Bütün boyutlar mm ve ağırlık gram cinsindendir.

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.

Safety (pictures)

Don't use a screwdriver for stirring paint.

Don't use a screwdriver for stirring paint.

Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself.

Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself.

Don't use a screwdriver near live wires or for electrical testing.

Don't use a screwdriver near live wires or for electrical testing.

Don't use a screwdriver for prying, punching, chiselling, scoring or scraping.

Don't use a screwdriver for prying, punching, chiselling, scoring or scraping.

  • Ergonomik tasarımlı saplar

    Unior tornavida grubunda kullanılan üstün kaliteli malzemeler, mükemmel bir tutuş sağlamak için ergonomik tasarımlı saplarla tamamlanmıştır.

  • Üç bileşenli sap

    Yumuşak ve sert yüzey kombinasyonuyla, patenti Unior'a ait olan özel üç bileşenli sap, çalışırken bilekte asgari ölçüde kasılma oluşturarak rahat ve verimli bir performans sağlar.

  • Kaymaz kavrama

    Çeşitli vida profillerine uyum sağlayabilen ve yenilikçi üç bileşenli saplarla öne çıkan UNIOR tornavidaları, büyük bir verimlilik ve kaymaya dayanıklı bir kavrama sağlar.