160/2-H

Atributi proizvoda

  • materijal: Premium krom-vanadij
  • kovan, u cijelosti ojačan i zakaljen
  • 480/6

Prednosti:

  • račna: dvosmjerna, smjer zatezanja/otpuštanja podešava se pomoću gumba
  • "zaustavni" prsten na okastom dijelu ključa spriječava proklizavanje ključa s matice i pozicionira ga nazad na maticu
  • omogućava brzo i lako pritezanje matice i brzo, sigurno i precizno pozicioniranje ključa na maticu
  • kovana metalna kopča koja se ne može rastaviti
  • na svakom je alatu označena težina alata
  • u kopču je moguće učvrstiti dva karabina, što omogućuje sigurnu zamjenu alata
  • Alat Unior je prilagođen radu na visini i održava osnovne funkcije alata
  • Metalna klizna kopča ne ometa vijak s jednom ili drugom stranom ključa
#title#
šifraWrench sizeDužinaWidthŠirinaThicknessDebljinasr: težina-- prazen stolpec -- 
626389813417,116,78,44,741
626390915821218,45,568
6263911015821218,45,566
6263921116422,6239,7677
6263931216723,8259,76,287
6263941317724,927,59,76101
62639514189272910,17120
6263961519828,131,511,77,2148
6263971620429,93311,77,5166
6263981722431,934,911,78207
6263991824534,438,9128,8249
6264001924534,438,91912247
6264012128045,742,614,29,5399
6264022228045,742,614,29,5378
6264032431051,746,514,710484
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (Slike)

User must be trained to perform work at heights pursuant to the national legislation.

After any fall of a tool, check the rope and the tool. If necessary, replace the tool and/or rope.

The maximum weight of each tool defined by Unior as safe tool for work at heights attached to a work belt amounts to 2.3kg.

The total weight of tools that can be attached to a user's work belt should not exceed 10% of the user's weight.

Attachment ropes should not be shortened, reworked etc. If a rope is damaged or destroyed, do not use the tools.

During work, do not unfasten or detach tools from yourself.

When changing (switching) tools, it is recommended to observe the procedure of replacement described in the Unior d.d. catalogue (tools are attached throughout the replacement with one carabiner or the replacement is made at a so-called safe place).

Do not drop or throw tools deliberately, since this may result in a spring effect and unforeseen consequences.

Tools on a rope should not be wound, since that may lead to unforeseen consequences.

User selects Unior attachment elements depending on the purpose of use and with respect to the weight of tools (tool weight is indicated on a tool).

Tracking manufacture code and final control code are indicated on each tool.

The carabiner on the lanyard is attached to the ring on the tool. The rings on the tools are large enough to accept 2 carabiners.

The carabiner on the lanyard has to be protected against opening using a lock ring.

Before removing the tool from the belt, unscrew the lock ring on the carabiner on the belt.

Open the carabiner on the belt and remove the tool, which is attached to a lanyard, from the carabiner on the belt. The tool is now ready for use.

Correct attachment of the tool to the lanyard. Return the tool to the belt following the steps in reverse order.

Using the socket remover (Article 1111) depress the pin in the hole while removing the socket from the square drive of the ratchet and then switch the socket or extension.

  • Visoko učinkovita rješenja

    Rad na visini je povezan s velikim rizikom, zato sigurnost mora biti na prvom mjestu. Unior-sinonim za kvalitetni ručni alat, koji smo nadogradili posebno za rad na visini kako bi smanjili mogućnost ozljeđivanja.
  • Kvalitetan alat za sigurnosni rad na visini.

    Alat za rad na visini standardni je alat s nadogradnjom - mogućnost osiguravanja, vezanjem za remen. Povezani alat značajno poboljšava sigurnost posla.
  • Visoka preciznost

    Alat smo doradili tako da su sačuvane njegove osnovne ergonomske funkcije, ergonomija i uporaba odnosno smanjene su u najmanjoj mogućoj mjeri.