ATTRIBUTS DU PRODUIT

Le jeu comprend :

  • 5x flat screwdriver CR (article 605CR) dim. 0.5 x 3.0x80, 0.8 x 4.0x100, 1.0 x 5.5x125, 1.2 x 6.5x150, 1.2x8.0x175
#title#
Nom du produit SKU Article Dimensions Quantité Poids
Jeu de tournevis CR 617017 606CS5CR - 5 475
Tournevis CR mécanicien pour vis à fente 605CR 0.5 x 3.0x80, 0.8 x 4.0x100, 1.0 x 5.5x125, 1.2 x 6.5x150, 1.2 x 8.0x175 5
* Les images des produits ne sont pas contractuelles. Toutes les dimensions sont en mm, les poids en grammes.

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.

Safety (Photo)

Don't use a screwdriver for stirring paint.

Don't use a screwdriver with rounded edges or tips; it will slip and cause damage to the work or yourself.

Don't use a screwdriver near live wires or for electrical testing.

Don't use a screwdriver for prying, punching, chiselling, scoring or scraping.

  • manche au design ergonomique

    A la qualité supérieure des matériaux utilisés pour la gamme de tournevis Unior viennent s’ajouter des poignées de conception ergonomique qui permettent une excellente qualité de prise.
  • manche tri-matière

    Grâce à l’association de surfaces rigides et souples, la poignée spéciale à trois composantes (brevetée Unior) permet une utilisation efficace et confortable qui sollicite très peu le poignet pendant le travail.
  • Prise antidérapante

    Conçus pour s’adapter à une large variété de profils de vis et possédant une poignée à trois composantes, les tournevis UNIOR assurent une grande efficacité et une prise antidérapante.