导磁体/退磁器
数据表
配置文件
产品属性
- 材料：ABS
- 蓝色
用途:
- 用磁化器把螺丝刀的顶端磁化，这样螺丝钉就能粘在刀尖上。通过标记为+的磁化器的开口推动螺丝刀的尖端和轴，螺丝刀的尖端将立即磁化。
- 通过将刀头伸入带有标记的磁化器的开孔，并通过轻轻摩擦开孔的内壁，可以使磁头产生磁性或消磁。
- 磁化的持续时间取决于使用面积。如果在磁场线较强的房间(如电控箱)使用磁化螺丝刀，尖端退磁速度会更快。
- 磁力仪用于螺丝刀固定螺钉，螺钉不能直接对准孔内，但可以放入孔内或用螺丝刀尖端旋紧点。同样适用于松开，因为螺钉可以很容易地从空间有限的区域拆卸下来。磁化后的磁头还可以用于拾取微小的金属物体，这些物体很难到达用手无法到达的地方。
重要事项！
- 磁化螺丝刀不能用于抓取不锈钢螺丝。
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.
Safety tips
- Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
- Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
- A rounded tip should be redressed with a file; make sure edges are straight.
- Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
- Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
- A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
- Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
- Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
- Don't use a screwdriver with a split or broken handle.
- Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
人体工程学设计手柄
Unior螺丝刀选用优质材料生产符合人体工程设计手柄，从而提供出色的握持感。三层材料组合手柄
由三种材料特殊制造的手柄（Unior专利）表面的软硬度使得维修工作舒适高效而且省力。防滑设计
创新的三层手柄螺丝批适用于各种螺钉，UNIOR螺丝批能够确保维修工作的高效性，并且防滑。