VDE TBI 绝缘细长电工螺丝刀

#tif#
604VDETBI

数据表

pdfVDE TBI 绝缘细长电工螺丝刀 - 604VDETBI

pdf Certificate

更多关于产品

配置文件

Article made according to VDE standardsScrewdriver profile, flatPremium hard chrome vanadium steelLifetime warranty

标准

DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

产品属性

  • 螺丝刀：切割器 - 特种工具钢、锻造、完全淬火与回火，完全淬火与回火
  • 黑色刀头
  • 手柄：符合人体工程学的形状
  • 三种成分组成的材料
  • 挂孔
  • 根据DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018标准生产

优势：

  • 带细长刀片的型号
  • 尽管螺丝刀形状细长，其作为正常绝缘螺丝刀时，功能和安全性与普通螺丝刀一致。
  • 细长的刀片可以对难以触及的位置进行作业
#title#
编码Thickness x widthAdditionsl lenghtLenght重量
6240630.6 x 3.510018537
6240640.8 x 4.010018539
6240651.0 x 5.512522574
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.

使用 (图片)

人体工程手柄设计 = 保护手部

人体工程手柄设计 = 保护手部

较大的手部接触面积 = 更大的转矩功率

较大的手部接触面积 = 更大的转矩功率

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
  • VDE tools that have several parts, have to be assembled correctly before use.
  • When working with VDE tools avoid contact with water.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Don't use tools that shows sign of wear and have the second layer of plastic visible.

  • 终极保护

    Unior绝缘VDE工具确保了在最高1000伏直流电带电作业使用时可提供终极保护，所有工具的使用均通过了冲击强度、电气、阻燃、绝缘附着和压痕试验，且每件工具均单独测试。

  • 优质钢材

    电气和其他电力设施搭配使用的绝缘扳手、钳子、剪子、螺丝刀及其他工具均由带有额外保护的优质钢制成，并专为简单安全的使用而设计。

  • VDE标准

    VDE绝缘和测试符合VDE标准，Unior的带电环境使用工具符合国际公认的欧洲EN 60900标准要求。