190.1/1ABI-H

Atributi proizvoda

  • materijal: Premium Flex specijalni alatni čelik
  • hladno kovano tijelo
  • u cijelosti ojačan i zakaljen
  • kromirani (ISO 1456:2009)
  • 480/6

Prednosti:

  • kovana metalna kopča koja se ne može rastaviti
  • na svakom je alatu označena težina alata
  • izvedba u skladu s ISO 3315-B (pribor) i ISO 2725-1B (nasadni ključevi)
  • Promjena ključeva i pribora je moguća samo uz uporabu za to namjenjenog alata (art. 1111)
  • nasadni ključevi i pribor s bočnom rupom
  • 480/6
Oprez!
  • Zamjena nasadnih ključeva i pribora se mora izvoditi samo uz prethodno osiguranom mjestu
#title#
šifraSign SQ 4-point profileDužinaDebljinaŠirinasr: težina-- prazen stolpec -- 
6262451/2"2603645456 +

* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (Slike)

User must be trained to perform work at heights pursuant to the national legislation.

After any fall of a tool, check the rope and the tool. If necessary, replace the tool and/or rope.

The maximum weight of each tool defined by Unior as safe tool for work at heights attached to a work belt amounts to 2.3kg.

The total weight of tools that can be attached to a user's work belt should not exceed 10% of the user's weight.

Attachment ropes should not be shortened, reworked etc. If a rope is damaged or destroyed, do not use the tools.

During work, do not unfasten or detach tools from yourself.

When changing (switching) tools, it is recommended to observe the procedure of replacement described in the Unior d.d. catalogue (tools are attached throughout the replacement with one carabiner or the replacement is made at a so-called safe place).

Do not drop or throw tools deliberately, since this may result in a spring effect and unforeseen consequences.

Tools on a rope should not be wound, since that may lead to unforeseen consequences.

User selects Unior attachment elements depending on the purpose of use and with respect to the weight of tools (tool weight is indicated on a tool).

Tracking manufacture code and final control code are indicated on each tool.

The carabiner on the lanyard is attached to the ring on the tool. The rings on the tools are large enough to accept 2 carabiners.

The carabiner on the lanyard has to be protected against opening using a lock ring.

Before removing the tool from the belt, unscrew the lock ring on the carabiner on the belt.

Open the carabiner on the belt and remove the tool, which is attached to a lanyard, from the carabiner on the belt. The tool is now ready for use.

Correct attachment of the tool to the lanyard. Return the tool to the belt following the steps in reverse order.

Using the socket remover (Article 1111) depress the pin in the hole while removing the socket from the square drive of the ratchet and then switch the socket or extension.

  • Visoko učinkovita rješenja

    Rad na visini je povezan s velikim rizikom, zato sigurnost mora biti na prvom mjestu. Unior-sinonim za kvalitetni ručni alat, koji smo nadogradili posebno za rad na visini kako bi smanjili mogućnost ozljeđivanja.
  • Kvalitetan alat za sigurnosni rad na visini.

    Tools for working at heights are standard tools equipped with attachment points. secured tools significantly increase job safety.
  • Visoka preciznost

    Alat smo doradili tako da su sačuvane njegove osnovne ergonoske funkcije, ergonomija i uporaba odnosno smanjene su u najmanjoj mogućoj mjeri.