682/2

Atributi proizvoda

  • materijal: Premium Flex Plus alatni čelik
  • kovana, potpuno poboljšana i ojačana
  • završna obrada: kromiranje prema standardu ISO 1456:2009, vijak bruniran
  • krakovi podesivi u dva položaja po visini
  • krakove dobro pričvrstiti pod doi koji se izvlači
#title#
šifraBr.L max.D maxMaximum puller load capacity in kilonewtons (kN)Maximum puller load capacity in tons (t)ThreadWrench sizesr: težina-- prazen stolpec --
61260409090252.5M 10 x 113305
6017671130160404M 14 x 1,5171725
6017682190230505M 20 x 2222570
6017693250300808M 22 x 2245100
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.

Upotreba (Slike)

Safety (Slike)

Don't use a spindle that is damaged.

Don't use a puller which has a dirty spindle. Always clean your tools properly.

Don't grind, weld or reheat-treat puller arms.

Don't use pneumatic tools with pullers.

Never use a pipe extension or other form of lever to increase the leverage.

Never put the puller spindle off centre, as slippage of the puller arm can occur.

Always oil the puller spindle.

Always use the right tool for the job.

Always centre the puller spindle on the middle of the object, so the holding arms are distributed evenly on the body.

Questions & Answers

  • Can we achieve greater pulling force using a three-arm puller compared to a two-arm puller?
    It depends on the dimensions. In principle, yes, because the force is distributed over several arms.
  • One arm broke. Do I have to replace all the arms or just the broken one?
    It is necessary to change all the arms.
  • Dodatna izdržljivost

    Unior izvlakači, dostupni sa dva, tri ili pet podesivih krakova, s kliznim čekićem, poteznim klinom ili u nekoliko drugih verzija, izrađeni su od ugljičnog čelika. Poseban proces kovanja jamči izuzetnu trajnost.
  • Jednostavno korištenje

    Unior sustavi izvlakača omogućuju sigurno i učinkovito demontiranje ležajeva, čahura i zupčanika. Svi izvlakači jednostavni su za korištenje, fleksibilni i povećane nosivosti