Izvijač plosnati električarski VDE TBI
Više o proizvodu
Standard
DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018
Atributi proizvoda
- oštrica od Premium Hard krom-vanadijev čelika, u cjelosti ojačana i zakaljena
- vrh bruniran
- ručka ergonomski oblikovana
- trokomponentni materijal
- otvor u dršci za vješanje
- izrađeno prema standardu DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018
- izrađeno prema standardu ISO8764-1,2
* Slike proizvoda su simbolične. Sve dimenzije su u mm, masa je u g.
Upotreba (Slike)
Safety tips
- Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
- Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
- A rounded tip should be redressed with a file; make sure edges are straight.
- Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
- Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
- A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
- VDE tools that have several parts, have to be assembled correctly before use.
- When working with VDE tools avoid contact with water.
- Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
- Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
- Don't use a screwdriver with a split or broken handle.
- Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
- Don't use tools that shows sign of wear and have the second layer of plastic visible.
Pitanja i odgovori (Q&A)
-
Are insulated (VDE) tools considered as personal protective equipment (PPE)?According to EU regulations, VDE tools are not considered as PPE.
-
Are the VDE tools only being sampled in series production?The high voltage test (at 10kV) is performed fully on each tool. Other tests are performed in accordance with the EN60900 standard.
Vrhunska zaštita
Uniorov izolirani VDE alat osigurava potpunu zaštitu čak i kada se koristi pri naponu do 1000 V. Sigurnost svakog individualnog Uniorovog VDE alata temeljito se ispituje putem testova: test otpornosti na plamen, testovi izolacije i provodljivosti, test otpornosti na udar i test otpornosti žiga.Čelik vrhunske kvalitete
Izolirani ključevi, kliješta, škare, izvijači i ostali alati za rad pod naponom izrađeni su od visokokvalitetnog alatnog čelika, sa dodatnom zaštitom, a dizajnirani su za jednostavno i sigurno korištenje.VDE propisi
VDE alati su izolirani i ispitani u skladu s VDE propisima. Unior alat za rad pod naponom zadovoljava sve zahtjeve međunarodno priznatog europskog standarda EN 60900.