1107

Características del producto

  • Cierre seguro de tres puntos
  • Cinturón ajustable a máx. 114 cm / 45 ”
  • carga maxima 30 kg
  • 6 anillos de metal
  • cómodo cuando está cargado
  • no es adecuado para la protección personal
#title#
códigoLongitud máximaPeso-- prazen stolpec -- 
627332114255
* Las imágenes de los productos son simbólicos. Todas las dimensiones son en mm, peso en gramos.

Uso (imágenes)

User must be trained to perform work at heights pursuant to the national legislation.

After any fall of a tool, check the rope and the tool. If necessary, replace the tool and/or rope.

The maximum weight of each tool defined by Unior as safe tool for work at heights attached to a work belt amounts to 2.3kg.

The total weight of tools that can be attached to a user's work belt should not exceed 10% of the user's weight.

Attachment ropes should not be shortened, reworked etc. If a rope is damaged or destroyed, do not use the tools.

During work, do not unfasten or detach tools from yourself.

When changing (switching) tools, it is recommended to observe the procedure of replacement described in the Unior d.d. catalogue (tools are attached throughout the replacement with one carabiner or the replacement is made at a so-called safe place).

Do not drop or throw tools deliberately, since this may result in a spring effect and unforeseen consequences.

Tools on a rope should not be wound, since that may lead to unforeseen consequences.

User selects Unior attachment elements depending on the purpose of use and with respect to the weight of tools (tool weight is indicated on a tool).

Tracking manufacture code and final control code are indicated on each tool.

The carabiner on the lanyard is attached to the ring on the tool. The rings on the tools are large enough to accept 2 carabiners.

The carabiner on the lanyard has to be protected against opening using a lock ring.

Before removing the tool from the belt, unscrew the lock ring on the carabiner on the belt.

Open the carabiner on the belt and remove the tool, which is attached to a lanyard, from the carabiner on the belt. The tool is now ready for use.

Correct attachment of the tool to the lanyard. Return the tool to the belt following the steps in reverse order.

Using the socket remover (Article 1111) depress the pin in the hole while removing the socket from the square drive of the ratchet and then switch the socket or extension.

Accesorios

  • SOLUCIONES ALTAMENTE EFICIENTES

    Trabajar en alturas implica altos niveles de riesgo, por lo que no se puede dejar nada al azar. Unior, sinónimo de herramientas manuales de alta calidad, presenta una línea de herramientas especialmente adaptadas para trabajar en alturas con el fin de evitar caídas peligrosas.
  • HERRAMIENTAS DE ALTA CALIDAD PARA TRABAJOS SEGUROS EN ALTURAS

    Las herramientas para trabajar en alturas son herramientas estándar equipadas con puntos de sujeción. Las herramientas aseguradas aumentan significativamente la seguridad laboral
  • Alta precisión

    Las herramientas de Unior para trabajar en alturas se han diseñado para preservar las funciones básicas, la ergonomía y la utilidad de las herramientas, o para reducirlas al mínimo posible.