更多关于产品

配置文件

Pressing forceLifetime warranty

产品属性

  • 外壳主体由灰口铸铁铸造
  • 锻造的碳素工具钢钳口,淬火与回火处理
  • 主体喷漆,钳口途防腐油,其他部分镀锌
  • 主轴防止损坏
  • uniPRO滑动轴确保移动部件的精确运行
  • 专业的虎钳结合旋转底座
#title#
编码WidthMaximum lenghtLenghtDiameterHeightThicknessWidthHeightLenghtWidth重量
6215648010021511 - 3546422811370.4483500
62148112516033617 - 627366441761107514400
62156715019040020 - 668880532111329024200
62157020022046124 - 80103936226515410537800
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.

使用 (图片)

Accessories

Safety tips

check-mark-yes.png
  • Avoid clamping with heavy pressure on the corner of the vice jaws as it may break off a corner of a jaw.
  • Replace a bent handle as soon as possible.
  • Use bolts in all of the holes in the base of the vice.
  • Use lock washers under the nuts.
  • When work is held in a vice for sawing, saw as close to the jaws as possible to prevent vibrations. Be careful not to cut into the jaws.
  • When clamping extra long work, support the far end of work rather than putting extra pressure on the vice.
  • Regularly lightly oil all moving parts.
  • If the threaded part of the vice is exposed, keep it free of chips and dirt.
  • Discard any vice that exhibits the slightest hairline fracture.
  • Always use a vice large enough to hold the work without strain.
check-marks-no.png
  • Don't use the jaws of a vice as an anvil.
  • Never use an extension handle for extra clamping pressure.
  • Never pound on the handle to tighten beyond hand pressure.
  • Never try to repair a vice by welding or brazing.
  • Don't try to bend a heavy rod in a light vice.
  • 得心应手

    工具的广泛应用范围适合各种用户目标群。夹子确保了快速简便的夹握。切割和砂轮设计用于坚硬和软质金属、塑料等。
  • 抓握有力

    Unior工具出色的地方在于抓握有力,其可牢牢夹持待作业的物件且不会造成伤害。夹子的导轨可以让夹钳在迅速移动把手时实现准确移动。旋转底座上的装置确保其可以适配待处理物件。
  • 顶级品质材料

    周密考虑的设计和精准的制造工艺可让处理物件即使在较大的负载下,也可避免受损。通过这些特点,高效的Unior工具成为了需要优质耐用工具的工匠们的不二选择。