VDE TBI 绝缘TX型螺丝刀

#tif#
621VDETBI

数据表

pdfVDE TBI 绝缘TX型螺丝刀 - 621VDETBI

pdf Certificate

更多关于产品

配置文件

Article made according to VDE standardsTX profilePremium hard chrome vanadium steelLifetime warranty

标准

DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018

产品属性

  • 螺丝刀：切割器 - 特种工具钢、锻造、完全淬火与回火，完全淬火与回火
  • 黑色刀头
  • 手柄：符合人体工程学的形状
  • 三种成分组成的材料
  • 挂孔
  • 根据DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018标准生产
#title#
编码Wrench sizeAdditionsl lenghtLenght重量
616454TX 106014035
616455TX 158018037
616456TX 208018043
616457TX 258018063
616458TX 2710021076
616459TX 3010021098
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.

使用 (图片)

Large hand contact area for more torque power.

Large hand contact area for more torque power.

人体工程手柄设计 = 保护手部

人体工程手柄设计 = 保护手部

较大的手部接触面积 = 更大的转矩功率

较大的手部接触面积 = 更大的转矩功率

Safety tips

check-mark-yes.png
  • Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
  • Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
  • A rounded tip should be redressed with a file; make sure edges are straight.
  • Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
  • Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
  • A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
  • VDE tools that have several parts, have to be assembled correctly before use.
  • When working with VDE tools avoid contact with water.
check-marks-no.png
  • Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
  • Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
  • Don't use a screwdriver with a split or broken handle.
  • Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
  • Don't use tools that shows sign of wear and have the second layer of plastic visible.

Questions & Answers

  • Are insulated (VDE) tools considered as personal protective equipment (PPE)?
    According to EU regulations, VDE tools are not considered as PPE.
  • Are the VDE tools only being sampled in series production?
    The high voltage test (at 10kV) is performed fully on each tool. Other tests are performed in accordance with the EN60900 standard.

  • 终极保护

    Unior绝缘VDE工具确保了在最高1000伏直流电带电作业使用时可提供终极保护，所有工具的使用均通过了冲击强度、电气、阻燃、绝缘附着和压痕试验，且每件工具均单独测试。

  • 优质钢材

    电气和其他电力设施搭配使用的绝缘扳手、钳子、剪子、螺丝刀及其他工具均由带有额外保护的优质钢制成，并专为简单安全的使用而设计。

  • VDE标准

    VDE绝缘和测试符合VDE标准，Unior的带电环境使用工具符合国际公认的欧洲EN 60900标准要求。