VDE TBI 绝缘一字-十字(SL/PH)细长螺丝刀
产品属性
- 螺丝刀：切割器 - 特种工具钢、锻造、完全淬火与回火，完全淬火与回火
- 黑色刀头
- 手柄：符合人体工程学的形状
- 三种成分组成的材料
- 挂孔
- 根据DIN EN IEC 60900 (VDE 0682-201):2019-04; EN IEC 60900:2018标准生产
优势：
- 带细长刀片的型号
- 尽管螺丝刀形状细长，其作为正常绝缘螺丝刀时，功能和安全性与普通螺丝刀一致。
- 细长的刀片可以对难以触及的位置进行作业
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.
使用 (图片)
人体工程手柄设计 = 保护手部
较大的手部接触面积 = 更大的转矩功率
Safety tips
- Use a screw holding screwdriver to get screws started in awkward, hard-to-reach areas.
- Use a stubby screwdriver in close quarters where a conventional screwdriver cannot be used.
- A rounded tip should be redressed with a file; make sure edges are straight.
- Screwdrivers used in the shop are best stored in a rack. This way, the proper selection of the right screwdriver can be quickly made.
- Keep the screwdriver handle clean; a greasy handle is apt to cause accidents.
- A screwdriver should never be used as pry bar. If it is overstressed in this manner, the blade might break and send a particle of steel into the operator's arm or even towards his eyes.
- VDE tools that have several parts, have to be assembled correctly before use.
- When working with VDE tools avoid contact with water.
- Don't use pliers on the handle of a screwdriver to get extra turning power. A wrench should only be used on the square shank or bolster of a screwdriver that is especially designed for that purpose.
- Don't expose a screwdriver blade to excessive heat as it may reduce the hardness of the blade.
- Don't use a screwdriver with a split or broken handle.
- Don't use a regular screwdriver to check a storage battery or to determine if an electrical circuit is live.
- Don't use tools that shows sign of wear and have the second layer of plastic visible.
终极保护
Unior绝缘VDE工具确保了在最高1000伏直流电带电作业使用时可提供终极保护，所有工具的使用均通过了冲击强度、电气、阻燃、绝缘附着和压痕试验，且每件工具均单独测试。优质钢材
电气和其他电力设施搭配使用的绝缘扳手、钳子、剪子、螺丝刀及其他工具均由带有额外保护的优质钢制成，并专为简单安全的使用而设计。VDE标准
VDE绝缘和测试符合VDE标准，Unior的带电环境使用工具符合国际公认的欧洲EN 60900标准要求。