通用铁皮剪

#tif#
563L-PLUS/7DP

数据表

pdf通用铁皮剪 - 563L-PLUS/7DP

配置文件

Handles are insulated with double layered insulationForm of cutting jawsVideo presentation用于长且连续的切割用于连续切割和有形状的切割Premium hard chrome vanadium steelLifetime warranty

产品属性

  • 材料：特种工具钢
  • 锻造
  • 双层塑料浸泡处理
  • 刀刃感应淬火

优势：

  • 耐用性延长10倍
  • 插入刀刃硬度64 HRC
  • 极硬插入刀刃
  • 更快速且使用更舒适
  • 应用范围更广
  • 更快捷易用的人体工程设计把手
  • 使用寿命更长的插入刀刃

用途:

  • 以400N/mm²的力切割最大厚度1.5mm砂磨钣金
#title#
编码LenghtAdditionsl lenght重量
61504028047577
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.

使用 (视频)

Safety tips

check-mark-yes.png
  • Be careful of sharp edges on the cutting edges of these tools.
  • Use only hand pressure for cutting.
  • Snips should be carefully put away after use. Wipe the cutting edges with a lightly oiled rag.
  • Oil the pivot bolt on the snips occasionally.
check-marks-no.png
  • Don't try to cut sharp curves with straight cut snips.
  • Don't resharpen a snip blade.
  • Don't use snips as a hammer, screwdriver or pry bar. Use proper tools for the job.
  • Don't store snips in a drawer with other tools. Tools with cutting edges should always be treated with extra respect.
  • Never hammer, or use your foot to get extra pressure on the cutting edges.

Questions & Answers

  • Can a left-handed person use right-handed cutters?
    Yes, the left-handed or right-handed scissors are intended for the direction of the radius cut.

  • 安全切割

    为安全准确地切割钢板、钢筋混凝土、电线、电缆和PVC管而设计，还包括果园和葡萄园的树枝修剪，Unior工具在专业和家用环境下的广泛应用证明了其高超的剪切水准。

  • 优质钢

    使用优质碳素钢制成的Unior剪刀，带有锻造的刃口、感应淬火的刀体和稳定绝缘的剪刀手柄，同时还带有有效的表面保护。

  • 回火刀刃

    通过完美回火的刀刃，您可以轻而易举的达到想要的修剪效果！