数显扭力扳手
产品属性
- 目标扭矩警告:蜂鸣器+ 12 LED灯
- 运行方式:峰值保持/跟踪
- 单位选择:N-m, in-lb, ft-lb, kg-cm
- 头部类型:可换头
- 齿轮齿:52
- 电池:AA×2块(不配电池)
- 电池寿命(连续工作):110小时。
- 电池寿命(待机):1年
- 数据内存大小:250个输入
- 9档可调扭力值
- 工作温度:-10˚C ~ 60˚C
- 储存温度:-20˚C ~ 70˚C
- 湿度:高达90%不凝结
- 跌落试验:1米
- 振动试验:10 g
- 电磁兼容性的证书
- 精度CW: +/-2%, CCW: +/-3%
- 电脑连接
Warranty
- 保修周期：1年
* Images of products are symbolic. All dimensions are in mm, and weight in grams. All listed dimensions may vary in tolerance.
使用 (图片)
Accessories
Safety tips
- Only an authorised person in a certificated service centre can perform technical maintenance.
- Tools should always be serviced and calibrated by a certified service engineer.
- Tool should only be used for precise tightening as specified in the instruction manual.
- Check instruction manual on how to read the value scale on the tool properly.
- Stop tightening after hearing a feedback from the tool.
- Use only sockets with the same square drive.
- Always return the value on the scale back to 0 after usage and before storing.
Safety (图片)
Don't store a tool that is dusty and not cleaned after use.
Always check that tool has a valid certificate and always follow the calibration interval specified in the instruction manual for your tool.
When applying torque, always apply it with even and constant pressure.
The torque wrench must always be kept protected in its original packaging when not used.
Photo (图片)
测量精度
卷尺、带有过载保护的扭力扳手、游标卡尺（包括数显游标卡尺）、水平仪、曲尺、泥工水平仪和测隙规都是精确测量仪器，没有这些仪器则无法顺利规划和执行工作。安全测试用途
测量工具精确且易于使用——既可作为普通卷尺对各种不同变量的常规测量，还可用于特定工种对螺纹等的测量。多版本
Unior精度工具通用款以及带有计时器或其他功能的顶尖数字类型产品，所有工具的设计和生产均符合当前国际通用标准。