单开口扳手
产品属性
- 材料：铬钒钢
- 落锻，完全淬火与回火
- 表面处理：根据DIN12476标准进行磷酸盐处理
- 根据DIN894标准生产
用途:
- 机器、发动机和其他设备加工行业。
- 大尺寸适用于造船业、石油业和其他需要使用较大机器和设备的重型工业。
- 此扳手特别适合需要高扭力和更多杠杆作用的难触及区域的作业。
使用 (图片)
Safety (图片)
Never use an extension or any form of lever to increase the leverage of a wrench.
Don't use them to free a rusted nut or to finally tighten such a nut.
The nut must always be fully seated before use.
Never use a hammer on wrenches.
Never expose any wrench to excessive heat, which may change the hardness and metal structure and ruin the tool.
Wrenches should not be ground to change their shape.
Don't use a wrench which has been damaged and weakened by being bent, cracked or severely worn.
Use only hand force, never use any form of lever to increase the leverage.
Select a wrench whose opening exactly fits the chosen nut.
Always pull rather than push and always maintain a proper stance with your feet firm to maintain your balance.
Periodic inspection of hand tools by competent personnel is a safety must.
使用寿命长
The wrenches are made of Premium chrome vanadium steel with a greater density at the points of the highest pressure, and such dimensioning and manufacture only increase their extreme power and durability.安全切割
凭借其专用的安全切割技术，扳手在螺钉或螺母外缘的表面（而非直接在其边缘位置）均匀施力，从而防止对螺钉和螺母外部和边缘造成损坏。创新设计
先进的设计保证了Unior扳手将力精确高效地作用于螺栓、螺母上。