MJETE DORE PROGRAMI

Katalogu i produkteve

BOLTSHARK cutter - 469SHARK/4ADP i ri

These ultra-powerful cutters are used to easily cut metal wire, including hardened and tempered alloys, and other extruded metals. They are ergonomically designed to apply a maximum force, while being easy on the hands. Drop-forged from high carbon steel with induction hardened cutting edges, BoltShark cutter can cut through up to 6mm of soft metal wire, 4mm of hard steel, and 3.6mm of tempered piano wire or steel spring. In addition to wire, the Boltshark cutters will quickly and cleanly cut through 5mm diameter nails, screws and rivets. The included groove holds thicker wire in position, preventing it from rolling along the cutting edge as the jaws are tightened.
drop forged from high carbon steel
fully hardened to ~47HRc, with cutting edges induction hardened to ~64HRc
finished with an anti-corrosive black coating and lightly oiled
double-dipped plastic non-slip handles provide good ergonomic hand grip
Avantazhet:
Engineered with a two-rivet joint, which uses a compound action to give increased cutting force with less effort.
The strongest force needs to be applied at the start of the cut, when the handles are furthest apart. BoltShark cutters are designed with the handles tighter together allowing the maximum force to be applied from the very start of the cut.
Central cutting edges leave a beveled finish on both sides of the cut.
for precise cutting of soft (up to 6 mm), hard (up to 3,5 mm) and piano wires (up to 3 mm)
easily cuts parts such as screws, nails, rivets, etc. up to 4 mm thickness


LBACKėrkesa blerja
627533 200 34,8 19,5 16,5 347 4B 10 Shtoj

Eksporto në PDF
Legjenda e simboleve
Legjenda e simboleve
-
Paketimi dhënave
Paketimit mjet Shitje me pakicë Paketë transportit
ABCA1B1C1
627533 - - - - - - - - -

Eksporto në PDF
Legjenda e simboleve
Legjenda e simboleve